Product Introduction

1. Introduction

The tester is used to determine the rupture strength and rupture index of paper. The tester can be configured to meet any ISO, GB, ASTM or other International specifications for paper, foils, paper boards and corrugated board etc. The main instruments are suitable for cardboard manufacturers, paper mills, scientific research institutions, etc.

2. Standards

ISO 2758, GB 454

3. Test Principle 

The sample is firmly fixed on the edge of the circular area by a pneumatic clamping device, and then the tester is turned on, and the pressure is gradually increased at a speed of (95 ± 5 ml/min). When the hydraulic fluid is pumped in at a stable rate, the sample is The glue film bulges freely together, until the sample breaks, the maximum value of the applied hydraulic pressure is the breaking strength value of the test piece.

4. Features

Pneumatic sample clamping, adjustable clamping force
Equipped with aluminum foil for self-calibration
Equipped with air filter/regulator
Color touch screen

5.Specifications

6. Installation Requirements

7. Output

Thermal Printer

8. Standard Accessories

9. Optional Accessories

Correcting Aluminum Foil, Rubber Membrane, Air compressor, Silicone oil, Printer Paper